Regviz

Freescale Semiconductor /MK60DZ10 /FTM2 /MODE

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as MODE

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Freescale Semiconductor/MK60DZ10/FTM1/MODE#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (0)FTMEN 0 (INIT)INIT 0 (0)WPDIS 0 (0)PWMSYNC 0 (0)CAPTEST 0 (00)FAULTM 0 (0)FAULTIE

WPDIS=0, FAULTM=00, FTMEN=0, PWMSYNC=0, CAPTEST=0, FAULTIE=0

Description

Features Mode Selection

Fields

FTMEN

FTM Enable

0 (0): Only the TPM-compatible registers (first set of registers) can be used without any restriction. Do not use the FTM-specific registers.

1 (1): All registers including the FTM-specific registers (second set of registers) are available for use with no restrictions.
INIT

Initialize the Channels Output
WPDIS

Write Protection Disable

0 (0): Write protection is enabled.

1 (1): Write protection is disabled.
PWMSYNC

PWM Synchronization Mode

0 (0): No restrictions. Software and hardware triggers can be used by MOD, CnV, OUTMASK, and FTM counter synchronization.

1 (1): Software trigger can only be used by MOD and CnV synchronization, and hardware triggers can only be used by OUTMASK and FTM counter synchronization.
CAPTEST

Capture Test Mode Enable

0 (0): Capture test mode is disabled.

1 (1): Capture test mode is enabled.
FAULTM

Fault Control Mode

0 (00): Fault control is disabled for all channels.

1 (01): Fault control is enabled for even channels only (channels 0, 2, 4, and 6), and the selected mode is the manual fault clearing.

2 (10): Fault control is enabled for all channels, and the selected mode is the manual fault clearing.

3 (11): Fault control is enabled for all channels, and the selected mode is the automatic fault clearing.
FAULTIE

Fault Interrupt Enable

0 (0): Fault control interrupt is disabled.

1 (1): Fault control interrupt is enabled.

Links

()

Register License

Redistribution and use in source and binary forms, with or without modification,\nare permitted provided that the following conditions are met:\n o Redistributions of source code must retain the above copyright notice, this list\n of conditions and the following disclaimer.\n o Redistributions in binary form must reproduce the above copyright notice, this\n list of conditions and the following disclaimer in the documentation and/or\n other materials provided with the distribution.\n o Neither the name of Freescale Semiconductor, Inc. nor the names of its\n contributors may be used to endorse or promote products derived from this\n software without specific prior written permission.\n THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND\n ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\n DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR\n ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES\n (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;\n LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON\n ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\n SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data